Minnie, a.ka. Donita and Me, a.k.a Carlus, are loving their KewlMetal 7 Degree Rake - Custom Triple Tree Set Item KD-218 And we love their spirt, passion and drive for life!

Chrome Out Magazine Link

Awesome New Upper Fork Tubes for the Victory High Ball. KewlMetal’s Item # 560

Available in Chrome, Black, Chrome with Contrast Cut or Black with Contrast Cut!

The Lower Fork Sliders are sold separately, KewlMetal’s Item # 515

KewlMetal’s New Contrast Cut Tubes are already a huge hit with Victory lovers and KewlMetal fans! Everyboday has been waiting for the pictures of the final install and we finally received them… Thanks to Henry Haas They definitely look smooth Henry!

After a couple of modifactions to the upper fork tubes, KewlMetal finally produced a fantastic set to match the lower Fork Sliders. Here’s a brief overview of the install:

• Lift the bike
• Remove caliper, loosen pinch bolt,
• Remove axle, remove wheel, remove the fender
• Loosen pinch bolts on the trees
• Remove fork tubes
• Slide lower tubes over, then slide the tubes back into the trees
• Next loosen the head bolt just enough to get the tubes with the O-rings in place
• Then slide the tubes up and be careful that the o-rings are in the right place.
• Tighten all back up and torque.

Any questions? [[Show as slideshow]]

Comments or questions are welcome.

*(denotes required field)

Name: *

E-Mail Address: *

Subject: *

Message: *

CAPTCHA Code: *

Review:

“I saw the review on YouTube and had to have these! I ordered the Amber LEDs with the Smoked tubing, along with the Drugz circuit since I did want to use them with the turn signals.
The finished product not only adds a great look to the bike, but really adds a noticeable vision for the side of the bike. The bike itself is a head-turner, but people really take notice of the lights!
The only difficult part to this was the wiring…I found some additional wire because of the way I chose to run the wiring and then ended up adding some heat-shrink to add protection to the wires…I did solder and heat-shrink the connections into the wiring harness.
I am really impressed with the look and functionality of this product!!!

A-n added bonus is the customer service Jamie was great getting answers to the questions I had.

Highly recommended addition to the bike!”

For Use as a turn signal or tail light or whatever your imagination can come up with!

This kit comes with 8mm hollow mounting bolts.

You simply won’t find a nicer, more unique, or more beautiful bullet lights.

Can be fitted to all motorcycles! You can completely customize the finish. Phone #: 623-298-7181
Email: sales@kewlmetatal.com

For more KEWL ACCESSORIES VISIT: www.kewlmetalstore.com

Kewlmetal Products : 23 inch Blade Front Wheel, Blade Rear Wheel and pulley, Longboards, Large Bullet Lights, Mini Floorboards on highway brackets, Mini Ape Bars, Engine cover set, cheese wedge covers, billet grips, reservoir covers, 23 inch front fender, 10 degree triple trees, contrast cut fork tubes, mirror extensions, instrument bezels, custom shift and brake pedal knobs, rear brake reservoir cover, pop up gas cap, fork guards, engine mount cover plates, rear passenger mini floorboards, flame exhaust tips.

“Greetings from New Zealand!

Just a line to say thank you for the tremendous service on my recent order.

Product ordered on Monday 9th January here in NZ and delivered this morning 13th! Bits are fitted on the bike and I’ve been out this afternoon for a spin!!

Excellent service and products guys!

Regards

Ian Wilson (2010 Can Am Spyder with Kelmetal Adjustable Risers and now Mirror Extensions so that I can see past those handlebars. Brilliant products guys!)”

Check out KewlMetal’s 45 Degree rake on Mike’s Victory! Read the full story featured in V-TWIN Magazine (February 2012 Issue) at newstands now!!

KewlMetal built this custom bagger for Randy Berkley of Fontana, CA. Randy bought his 2007 Road King and knew he wanted to make it stand out. Being a good friend of KewlMetal’s Big Joe for over 30 years, he knew Big Joe and Matt from KewlMetal were the ones to do it. At the same time, KewlMetal was looking for a Harley to build to take to the 2011 V-Twin Expo in Cincinnatti. Big Joe picked up Randy’s bike and brought it to KewlMetal Inc in Prescott, AZ. The build began.

The first thing KewlMetal had to decide was what size wheel they were going to put on this Road King. They decided to go with a 26″ Front Wheel, paired with KewlMetal’s 45 Degree Bolt On Pro Street Kit. This was something that had never been done before, and KewlMetal knew it was the way to go. Now that they knew what size wheel to use, they had to decide what wheel design they were going to go with. A bike this special needed something incredible. The KewlMetal Kamillion wheel was the perfect choice. The interchangeable artwork in the Kamillion wheel screams CUSTOM. KewlMetal’s R&D Department, headed up by Matt Mrdeza (Co-Owner of KewlMetal Inc) got to work on designing custom parts for this build. Matt’s years of experience as an aeronautical engineer  as well as his passion for custom motorcycle building guaranteed that the bike was in good hands.

KewlMetal’s custom Air Intake Cover, cut with a skull to match the wheel, was added to the bike along with matching engine covers and floorboards to keep with the theme of the bike. Big Joe then enlisted the help of his good friends Joel and Willem at Dead Center Cycles. They all worked together to come up with the perfect fairing and saddlebags for this build. The Dead Center Smoothies not only looked amazing, but the fitment and quality were unsurpassed. The bags and fairing required no bondo or filling…they fit like a glove! Big Joe had a very specific vision for the rear fender on this Road King. He called Nick at Milwaukee Bagger and they got to work. Joe knew he wanted a slick fender with built in tail lights, and as always, Milwaukee Bagger delivered. The fitment was flawless and the service received from Milwaukee Bagger was as quick and courteous as usual. Randy at BCool Products in Canada provided the front fender, which really polished off the look. The Road King is virtually stock when it comes to the engine and performance, but one thing KewlMetal insisted on was a set of RPW exhaust. The pipes enhanced the sound of the bike and the seat of the pants performance was very noticeable. All that was left was paint. Brackman’s Auto Body in Prescott, AZ was the first and only choice for KewlMetal, as they have done all of the KewlMetal builds and their quality is impecable.The tribal sickle design and deep blue paint made naming this beast relatively easy…Insidious Moon.

Randy loves his new bagger and it is a dream to ride. The performance and handling are awesome! The combination of the 45 Degree rake kit and the 26″ front wheel makes the front end lighter than stock, making the ride smooth at both low and high speeds.

This bagger has made appearances at the V-Twin Expo, The Lauglin River Run and Las Vegas BikeFest as well as many local rallies, and it is a show-stopper every time. People cannot get enough of Insidious Moon.